HKS HIPERMAX S SERIES COILOVERS SUSPENSION TYPE FOR TOYOTA GR YARIS GXPA16 G16E-GTS 80300-AT035

HKS

HIPERMAX S SERIES COILOVERS SUSPENSION TYPE

80300-AT035

TOYOTA GR YARIS GXPA16

G16E-GTS

Without compromising the original ride feel, we have achieved a balanced improvement in the ride comfort required for everyday use and sports performance such as roll rigidity.The shape of the upper mount has been changed due to a minor change. A reinforced rubber mount has been adopted for the HKS original dedicated upper plate. The aim is to achieve a damping characteristic that is smooth and flexible while also having a sticky feel, and the stability and controllability at the limit have been significantly improved.Rather than using the same settings as the previous model, special tuning was applied to match the driving characteristics after the minor change.We also tested the newly added automatic transmission vehicle. It offers the best driving experience for both manual and automatic transmission vehicles. *1. Height from the road surface to the fender arch.*2. The vehicle height at the time of shipment is a reference measurement data based on the combination of the full kit settings made by HKS in-house. (This is our recommended vehicle height.)*3. Adjustable range (However, please note that driving at the lower limit in this case will not comply with safety standards.Also, even if it is within this adjustment range, depending on the vehicle height, interference with the body, arms, etc. may occur, which may cause problems with driving.Please note that defects such as damper oil leakage caused by using the vehicle height at an extreme lowering from the vehicle height at the time of shipment are not covered by the warranty.)*4. The range in which it is possible to drive without interference with the body, arms, etc. (However, this may not be the case depending on changes to tire and wheel sizes, etc.)Note) Data may vary depending on individual vehicle differences and assembly conditions.■ Points:The HIPERMAX S is now available for the later model GR Yaris.The shape of the front upper mount has changed since the later model, and accordingly, we have changed the type that uses the conventional genuine rubber mount to a reinforced rubber mount with a dedicated upper plate.In addition, instead of simply setting it to the same as the earlier model, we have reset it to match the later model and adjusted it to the evolution of the vehicle using the latest setting technology.In the case of genuine tire wheels, if the front case length is set to 313 mm or less, it will interfere with the fender at full steering and full bump, so please be careful when using it with the vehicle height lowered.Similarly, if it is set to 301 mm or less, it will interfere with the inner fender at full bump.At the time of shipment, the vehicle height setting is for AT vehicles added in the later model, so for MT, the best setting will be achieved if you set the vehicle height at the test time . *When changing the front spring rate, the spring free length will change from 200 mm to 220 mm. Please note that the lowering width (winding dimension) of the vehicle height will decrease before ordering.

YEAR: 2024.04~ Compatible with MT vehicles and 2024MC and later vehicles. 4WD only.

Images are for illustration purpose only. Actual product may vary.