J'S RACING HYPER INTERCOOLER FOR HONDA CIVIC FL5 ICR-L5

J'S RACING

HYPER INTERCOOLER

ICR-L5

HONDA CIVIC FL5

Material: Aluminum
The performance of the original FL5 intercooler cannot keep up with the amount of heat generated, so even in full normal conditions, the intake air temperature reaches 50-60°C in the high rotation range of 6000RPM or higher. *At an outside temperature of approximately 25°Cas the main cause・Because it is a turbo and has high output, the amount of heat generated by the turbine etc. is extremely large.・Insufficient cooler core capacity and fin problems・Difficulty letting air flow out when driving- Heat does not flow easily in the piping and intercooleretc. can be mentioned.In addition to engine cooling measures such as the thermostat, sports coolant, and aero parts, increasing the intercooler capacity = increasing the heat exchange rate and improving the turbine flow speed will result in stable output in the high rotation range and a significant increase in output. It has become possible to realize this.J'SRACING started joint development with DRL (Daiwa Radiator Manufacturing Co., Ltd.) to develop intercoolers.In addition to the output test using Dynapack, we also conducted actual driving tests on circuits and streets, and adjusted the fitting, resulting in a product that can be replaced with a genuine product without any major modification.As a result, we have achieved a cooling effect of approximately 5°C or more at the minimum intake air temperature and approximately 15°C or more at the maximum intake air temperature under full normal conditions! ! !In addition, by making it lightweight, we minimize the impact on overall driving performance by avoiding as much weight as possible in the front overhang, where the intercooler is mounted.Compatible with genuine turbines as well as big turbine kit replacement vehicles.*The power graph in the image was measured with an intercooler and FL5 HYPER-ECU option for intercooler (N-L5-ICR).*A stencil plate with the J'SRACING logo is included. If you would like the J'SRACING logo on the front, please spray paint using a stencil plate.*Two intercooler gaskets are included.■Compatible car model year/Date September 2022 or later■Core size /Core size H700mm × W172mm × T100mm■Product weight /Net weight 5.7 Kg□□Detailed interior design that supports instantaneous acceleration□□For optimal heat exchange, every detail has been carefully designed inside.The complex structure with fins built into the tube, rather than the typical multi-hole structure, is the result of DRL's advanced technological capabilities.Reduces unnecessary air resistance and draws in smooth air flow.□□Rectangular fins with increased core structure and strength□□The structure where the outer fin and the tube containing the inner fin are optimally spaced, and their orientations are crossed, allowing air to cross and pass vertically, is a new shape derived from various simulations.The outer fin has a highly strong design by folding the edges and creating a double structure on the surface that is exposed to the wind.We have reduced the weight of the fins without making them unnecessarily thick.□□Rounded convex tube shape□□In order to eliminate unnecessary air resistance and make it easier to attract running wind into the core, running wind is efficiently sucked into the outer fin from a convex tube with rounded corners. In addition, the tube convex part has a triple structure made of aluminum material, reducing fatal damage from tire debris and flying stones. Since the intercooler is easily damaged, we have taken measures to maintain high performance.□□Uniquely shaped plate□□The intake side of the header plate is designed with a plump, gentle curve in order to reduce the resistance to the maximum amount of air flowing into the core from the inlet pipe. Minimizes internal pressure loss.Warning/Caution●Civic Type R after September 2022 FL5 exclusive product Body number FL5-1000001 or later

Images are for illustration purpose only. Actual product may vary.