¥134,191 JPY ¥143,000 JPY
| /
| Brand | M&M HONDA |
| Series Name | CARBON BONNET TYPE MR TWILL CARBON FRP TYPE MR1 |
| Product Number | 01100-ZF1-MR001 |
| Compatible Car | CR-Z ZF1 ZF2 |
| Product Description | It is an aero bonnet with 3 vents on the left and right of the bonnet. The vents are laid out in a flowing silhouette design and fused with the CR-Z's innovative lines to create a fresh and urban atmosphere. Type MR1 uses twill weave carbon material on the front side and FRP material on the back side. The back side has a black gel coat finish and the duct part uses an inner protector to prevent rain and dust from entering, so it helps to keep the engine room clean even on rainy days. The weight of the carbon bonnet type MR is reinforced on the back side, and the bonnet striker is used for mounting in the same mounting method as the genuine one. In consideration of safety, when driving on the street, you can use it with confidence even without a bonnet pin by using a genuine striker. However, when driving in sports such as circuit driving, the bonnet lock may come off due to wind pressure due to the lightweight bonnet, so it is recommended to use the bonnet pin together for safety. UV cut clear coating is recommended for carbon bonnet to maintain long-term luster. ■ Type MR1 (MR001) is front twill carbon back side FRP ■ Type MR2 (MR002) is front side plain weave carbon back side FRP ■ Type MR3 (MR003) is front side FRP back side FRP .. Please doubt if it is a genuine "M & M HONDA brand" before purchasing the product. If you have any doubts, please feel free to contact us. To purchase a genuine product, we recommend that you purchase it from an authorized retailer. Please contact us for the product. Be careful when purchasing from the internet. We do not provide any support for illegal copy products. Genuine products include M & M HONDA stamps, stickers, and instruction manuals. |
| Remarks | ■ As it is installed using a genuine bonnet striker, it can be easily installed by bolt-on. ■ When installing, be sure to adjust the left and right, front and rear clearances and the height of the left and right fenders. ■ The duct part is equipped with an inner protector, so it is safe even on rainy days. ■ Carbon material can suppress discoloration by applying UV clear coating. ■ Please note that carbon material is easily discolored by ultraviolet rays and heat. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
