¥23,511 JPY ¥24,200 JPY
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2088.008.2 |
| Compatible Car | SUZUKI SWIFT ZC33S ZD33S |
| Product Description | YEAR MODEL: 2017-01- Special Note: The side airbag function built into the genuine seat will no longer be available. For vehicles equipped with side airbags, the airbag warning light must be turned off. If a Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer illuminate. The seating position is 21mm higher when using the included adapter frame compared to the lowest position of the genuine seat height adjustment function. (When using New LX-F) (17mm lower when not using adapter frame). The handle offset is from the center of the handle, and the Recaro is about 4mm closer to the door (1mm closer to the door than the genuine seat). The amount of seat sliding is reduced by approximately 20mm compared to the original. Precautions/Interference information: The console and seat cushion will interfere at the forwardmost position of the seat slide. 1-3mm for Sportster, Cross Sportster, SR6/7/11. Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter and install it. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter and install it. |
| Remarks | Comes with side airbag canceller. Vehicles equipped with options such as cold region specifications are not yet confirmed. Minor changes were made from the conventional product (2088.004.1/2) on August 26, 2022. The position is 17mm lower than the conventional product. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
