¥31,933 JPY
| /
| Brand | J'S RACING |
| Series Name | FF ROLL CENTER ADJUSTER |
| Product Number | FCJ-F3 |
| Compatible Car | HONDA FIT GE8 |
| Compatible Engine | L15A |
| Product Description | Material: Tylot End S45C Tylot End Ball Stud SCM435 This time, special parts that can be changed to the ideal geometry by modifying the roll center of the fit have been remade. The previous roll center adjustment effect remains the same, but by changing the working angle fulcrum, we succeeded in further improving the effect on geometry changes. [What is a roll center adjuster] For a fit with a lowered vehicle height, the lower arm angle is worse and the position of the roll center is too low. When the center of gravity of the car and the roll center are separated, the amount of roll increases and the cornering force is sacrificed. Also, the suspension stroke is reduced and the limit is lowered. By installing the J'S RACING roll center adjuster, the lowered roll center can be corrected to the ideal position (the distance between the center of gravity of the vehicle and the roll center is corrected to a short position), and the ideal suspension geometry is realized. increase. [Mounting effect] For example, it has a great effect on fits with down suspensions, so it has a great effect on all low-down fits regardless of genre. ★ Reduction of excess roll amount due to lowdown ★ Improvement of tire contact feeling and steering information ★ Steering (front tire) is quicker to respond than before ★ Cornering force (grip power) ) Is greatly increased It is a special part born from super durability and time attack participation know-how, but it is a low down fit essential part that can be used comfortably even on the street. In the lower postion of Fit (Jazz) doesn't have good condition with the lower arms. It will give high speed cornering to your car. It cause from collection with geometory of lower arm angle. ), Late model (2010.10 ~), and FIT hybrid are supported. At J'S RACING, we repeated TEST many times and set the optimum thickness of 10mm for correcting the roll center of the fit. Please use for vehicles with a height reduction of 20 mm or more. * It is not recommended to install it on vehicles with a normal vehicle height up to 20 mm. Ball joint S45C Ball stud SCM435 HB195-260 Swing angle all around 39 ° 10mm extension type br> * It is not recommended to install it on vehicles with a normal vehicle height up to 20 mm. Ball joint S45C Ball stud SCM435 HB195-260 Swing angle all around 39 ° 10mm extension type br> * It is not recommended to install it on vehicles with a normal vehicle height up to 20 mm. Ball joint S45C Ball stud SCM435 HB195-260 Swing angle all around 39 ° 10mm extension type |
| Remarks | Engine: L15A Press work is required for mounting. We recommend that you replace it at a professional shop. It is necessary to adjust the vehicle height and alignment after replacement. Please follow the specified torque and install correctly. Please note that there is a risk of interference depending on the brand in the case of a car equipped with 15-inch aluminum outside the company. Need to do the alignment after install this parts. * Please check the tightening of bolts and nuts regularly after mounting. Please do this every time, especially before driving on the circuit. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
